- CNC Machinery
- >
- 1996 Flow CNC Waterjet 6'x12' with 2011 Controls and Software Upgrade
1996 Flow CNC Waterjet 6'x12' with 2011 Controls and Software Upgrade
SKU:
$39,990.00
$12,000.00
$12,000.00
Unavailable
per item
Minimum deposit credit purchase to make an offer $12000
Reference # TahaFazalCPKJuly11-5-50pm
1996 FLOW CNC Waterjet Flying Bridge with 2011 upgrade Automation Control System and Hypertherm Operating System recommended by Flow Corporation. 6' x 12' working size bed.
Original software and Controls were upgraded in 2011. Only the Upgrade cost $21,000 back in 2011.
Machine Training may be available from Controls and Software provider.
Cut from Autocad directly thru Waterjet.
Used on a glass fabricator plant, This low-hours used waterjet also cut thick glass as well as carves any design on glass.
All the parts and consumables are available from FLOW.
Hypertherm Software upgrade
Pump Type: 5XS-55 (208v)
Z Axis: Motorized, 6"
X-Y tables
Bed size: 6' x 12'
BENEFITS:
Cut materials from 1/16 over 10 inch thick. Whether you are cutting same thing every day, or change materials to meet customer demands, Flow Waterjet gets the job done.
Some of the benefits include Cold Cutting Process, Satin Smooth Edge and Minimal Kerf.
Please note you are paying for a deposit for a used Equipment listing. After you have signed our terms and conditions that will be emailed you can clarify the exact offer amount you wish to make and we will present the offer (provided it complies with our terms and conditions and you have signed our terms and
conditions) for you to the seller. Please Note until the buyers terms and conditions are signed your offer will not be presented to the seller/equipment owner. In the event you change your mind and/or do not sign our terms and conditions, you will be charged a four hundred and ninety five dollar fee or fifty percent of the value of the credit on file whichever is more for access you have had to our national listing service and you will be given ninety days of access from your deposits original submission date, the national listing service fee may be deducted from your deposit credit or paid separately (at our discretion). (You can request references via a link at the bottom).No national listing service fee will be charged to you as long as you keep your full deposit on file or buy any piece of equipment that you list as wanting to buy on our terms and conditions agreement with us (Even if it's found from another vendor or independent seller not yet listed on this site as long as you have signed our terms and conditions agreement and that equipment was listed on it).
Please note the national listing service fee is deemed earned immediately, this fee is only voided if you sign our terms and conditions agreement and successfully purchase a piece of equipment you have listed on that agreement within 1 year. You can also get the terms and
conditions free of charge by being a member of our VIP Service here http://www.buytanningsalons.com/ways-to-shop.html
In the event any of your offer/offers are not accepted please email us at sales@BuyTanningSalons.com to request instructions to get any remaining credit balance to you, a few questions will be required to answer for verification reasons. All credit balances will expire 1 year unless they are used or requested back .
You can request references here http://www.buytanningsalons.com/requestrefrences.html
Reference # TahaFazalCPKJuly11-5-50pm
1996 FLOW CNC Waterjet Flying Bridge with 2011 upgrade Automation Control System and Hypertherm Operating System recommended by Flow Corporation. 6' x 12' working size bed.
Original software and Controls were upgraded in 2011. Only the Upgrade cost $21,000 back in 2011.
Machine Training may be available from Controls and Software provider.
Cut from Autocad directly thru Waterjet.
Used on a glass fabricator plant, This low-hours used waterjet also cut thick glass as well as carves any design on glass.
All the parts and consumables are available from FLOW.
Hypertherm Software upgrade
Pump Type: 5XS-55 (208v)
Z Axis: Motorized, 6"
X-Y tables
Bed size: 6' x 12'
BENEFITS:
Cut materials from 1/16 over 10 inch thick. Whether you are cutting same thing every day, or change materials to meet customer demands, Flow Waterjet gets the job done.
Some of the benefits include Cold Cutting Process, Satin Smooth Edge and Minimal Kerf.
Please note you are paying for a deposit for a used Equipment listing. After you have signed our terms and conditions that will be emailed you can clarify the exact offer amount you wish to make and we will present the offer (provided it complies with our terms and conditions and you have signed our terms and
conditions) for you to the seller. Please Note until the buyers terms and conditions are signed your offer will not be presented to the seller/equipment owner. In the event you change your mind and/or do not sign our terms and conditions, you will be charged a four hundred and ninety five dollar fee or fifty percent of the value of the credit on file whichever is more for access you have had to our national listing service and you will be given ninety days of access from your deposits original submission date, the national listing service fee may be deducted from your deposit credit or paid separately (at our discretion). (You can request references via a link at the bottom).No national listing service fee will be charged to you as long as you keep your full deposit on file or buy any piece of equipment that you list as wanting to buy on our terms and conditions agreement with us (Even if it's found from another vendor or independent seller not yet listed on this site as long as you have signed our terms and conditions agreement and that equipment was listed on it).
Please note the national listing service fee is deemed earned immediately, this fee is only voided if you sign our terms and conditions agreement and successfully purchase a piece of equipment you have listed on that agreement within 1 year. You can also get the terms and
conditions free of charge by being a member of our VIP Service here http://www.buytanningsalons.com/ways-to-shop.html
In the event any of your offer/offers are not accepted please email us at sales@BuyTanningSalons.com to request instructions to get any remaining credit balance to you, a few questions will be required to answer for verification reasons. All credit balances will expire 1 year unless they are used or requested back .
You can request references here http://www.buytanningsalons.com/requestrefrences.html