BOBCAT T300 TRACK SKID STEER LOADER
SKU:
$25,999.00
$13,000.00
$13,000.00
per item
Minimum Offer with Deposit $13000
Reference #RaApr1-2016-9:43PM
2010 BOBCAT T300 TRACKED SKID STEER LOADER
-CABBED WITH HEAT/AIR
-3000LB LIFT CAPACITY
-ELIGIBLE FOR EXTENDED WARRANTY
*********PRICE INCLUDES FREIGHT TO ANYWHERE WITHIN 200 MILES OF RAPID CITY
SPECIFICATIONS: #821654RA
ENGINE:
Make-----Kubota
Model---V3300TE
Gross Power----81 hP
Power Measured------ @ 2400 rpm
Number of Cylinders------4
Displacement-----------201.4 cu in 3.3 L
Aspiration---------------turbocharged
OPERATIONAL:
Operating Weight--------9702 lb
Fuel Capacity-------------30 gal
Max Speed - high range-6.6 mph
UNDERCARRIAGE:
Ground Pressure---------4.2 psi
Number of Track Rollers-------per Side 5
Length of Track on Ground----5.3 ft in
Width of TracK------------------17.7 in
Track Gauge----------------------5 ft in
LOADER:
Operating Loader----------3000 lb
Tipping Load---------------9208 lb
Bucket Capacity-----------0.52 yd3
HYDRAULIC:
Pump Flow-----------------21.2 gal/min
Relief Valve Pressure-----3300 psi
DIMENSIONS:
Width Over Tracks---------6.5 ft in
Length w/ Bucket----------11.9 ft in
Length w/o Bucket---------9.6 ft in
Height to Top of CaB------6.7 ft in
Clearance at Max Lift and Dump-----8.3 ft in
Reach at Max Lift and Dump----------2.8 ft in
Turning Radius from Center - inc bucket-----84.2 in
-CABBED WITH HEAT/AIR
-3000LB LIFT CAPACITY
-ELIGIBLE FOR EXTENDED WARRANTY
*********PRICE INCLUDES FREIGHT TO ANYWHERE WITHIN 200 MILES OF RAPID CITY
SPECIFICATIONS: #821654RA
ENGINE:
Make-----Kubota
Model---V3300TE
Gross Power----81 hP
Power Measured------ @ 2400 rpm
Number of Cylinders------4
Displacement-----------201.4 cu in 3.3 L
Aspiration---------------turbocharged
OPERATIONAL:
Operating Weight--------9702 lb
Fuel Capacity-------------30 gal
Max Speed - high range-6.6 mph
UNDERCARRIAGE:
Ground Pressure---------4.2 psi
Number of Track Rollers-------per Side 5
Length of Track on Ground----5.3 ft in
Width of TracK------------------17.7 in
Track Gauge----------------------5 ft in
LOADER:
Operating Loader----------3000 lb
Tipping Load---------------9208 lb
Bucket Capacity-----------0.52 yd3
HYDRAULIC:
Pump Flow-----------------21.2 gal/min
Relief Valve Pressure-----3300 psi
DIMENSIONS:
Width Over Tracks---------6.5 ft in
Length w/ Bucket----------11.9 ft in
Length w/o Bucket---------9.6 ft in
Height to Top of CaB------6.7 ft in
Clearance at Max Lift and Dump-----8.3 ft in
Reach at Max Lift and Dump----------2.8 ft in
Turning Radius from Center - inc bucket-----84.2 in
Please note you are paying for a deposit on a used Equipment listing. After you have signed our terms and conditions that will be emailed you can clarify the exact offer amount you wish to make and we will present the offer ( provided it complies with our terms and conditions and you have signed our terms and
conditions ) for you to the seller. Please Note until the buyers terms and conditions are signed your offer will not be presented to the seller/equipment owner. In the event you change your mind and/or do not sign our terms and conditions, you will be charged a two hundred fifty dollar fee for access you have had to our national listing service and you will be given a year of access from your deposits original submission date, the national listing service fee may be deducted from your deposit or paid separately ( at our discretion). (Your can request references via a link at the bottom ).No national listing service fee will be charged to you as long as you keep your full deposit on file or buy any piece of equipment that you list as wanting to buy on our terms and conditions agreement with us ( Even if it's found from another vendor or independent seller not yet listed on this site as long as you have signed our terms and conditions agreement and that equipment was listed on it).
Please note the paperwork fee is demand earned when the "buyer's terms and conditions" are emailed to you this fee is only voided if you sign our terms and conditions agreement and successfully purchase a piece of equipment you have listed on that agreement within 1 year. You can also get the terms and
conditions free of charge by being a member of our National Listing Service here http://www.buytanningsalons.com/ways-to-shop.html
In the event any of your offer/offers are not accepted please email us at [email protected] to request instructions to get any remaining credit balance to you, a couple of questions will be required to answer for verification reasons. All credit balances will expire 1 year unless they are used or requested back .
You can request references here http://www.buytanningsalons.com/requestrefrences.html