- CNC Machinery
- >
- CNC Lathe CITIZEN Cincom E-32 with Bar Feeder
CNC Lathe CITIZEN Cincom E-32 with Bar Feeder
SKU:
$44,500.00
$13,350.00
$13,350.00
Unavailable
per item
Minimum deposit credit purchase to make an offer $13350
Reference # TahaFazalCPKJuly11-10-00am
Citizen Cincom E-32
SPECIFICATIONS:
Number of controlled Axis: 8
Control: Mitsubishi Melda 500L
Maximum Machining Diameter: 1.25"
Maximum Machining Length: 12.6"
Maximum Drilling Diameter: 5/8"
Maximum Tapping Diameter: M12
Spindle Through Hole Diameter: 1.50"
Spindle Speeds: 130 - 6,000 RPM
Spindle Speed Steps: Stepless S-4 Digit
Back Spindle Max Chuck Diameter: 1.26"
Back Machining Max Drilling Diameter: 0.47"
Back Spindle Speed: 150 - 5,000 RPM
Date of Manufacture: 1994
Serial Number: W6043
EQUIPPED WITH:
Mitsubishi Melda 500L Control
Bar Feeder
Manuals
MAKE AN OFFER | LOCAL PICKUP ONLY
Please note you are paying for a deposit for a used Equipment listing. After you have signed our terms and conditions that will be emailed you can clarify the exact offer amount you wish to make and we will present the offer (provided it complies with our terms and conditions and you have signed our terms and
conditions) for you to the seller. Please Note until the buyers terms and conditions are signed your offer will not be presented to the seller/equipment owner. In the event you change your mind and/or do not sign our terms and conditions, you will be charged a four hundred and ninety five dollar fee or fifty percent of the value of the credit on file whichever is more for access you have had to our national listing service and you will be given ninety days of access from your deposits original submission date, the national listing service fee may be deducted from your deposit credit or paid separately (at our discretion). (You can request references via a link at the bottom).No national listing service fee will be charged to you as long as you keep your full deposit on file or buy any piece of equipment that you list as wanting to buy on our terms and conditions agreement with us (Even if it's found from another vendor or independent seller not yet listed on this site as long as you have signed our terms and conditions agreement and that equipment was listed on it).
Please note the national listing service fee is deemed earned immediately, this fee is only voided if you sign our terms and conditions agreement and successfully purchase a piece of equipment you have listed on that agreement within 1 year. You can also get the terms and
conditions free of charge by being a member of our VIP Service here http://www.buytanningsalons.com/ways-to-shop.html
In the event any of your offer/offers are not accepted please email us at sales@BuyTanningSalons.com to request instructions to get any remaining credit balance to you, a few questions will be required to answer for verification reasons. All credit balances will expire 1 year unless they are used or requested back .
You can request references here http://www.buytanningsalons.com/requestrefrences.html
Reference # TahaFazalCPKJuly11-10-00am
Citizen Cincom E-32
SPECIFICATIONS:
Number of controlled Axis: 8
Control: Mitsubishi Melda 500L
Maximum Machining Diameter: 1.25"
Maximum Machining Length: 12.6"
Maximum Drilling Diameter: 5/8"
Maximum Tapping Diameter: M12
Spindle Through Hole Diameter: 1.50"
Spindle Speeds: 130 - 6,000 RPM
Spindle Speed Steps: Stepless S-4 Digit
Back Spindle Max Chuck Diameter: 1.26"
Back Machining Max Drilling Diameter: 0.47"
Back Spindle Speed: 150 - 5,000 RPM
Date of Manufacture: 1994
Serial Number: W6043
EQUIPPED WITH:
Mitsubishi Melda 500L Control
Bar Feeder
Manuals
MAKE AN OFFER | LOCAL PICKUP ONLY
Please note you are paying for a deposit for a used Equipment listing. After you have signed our terms and conditions that will be emailed you can clarify the exact offer amount you wish to make and we will present the offer (provided it complies with our terms and conditions and you have signed our terms and
conditions) for you to the seller. Please Note until the buyers terms and conditions are signed your offer will not be presented to the seller/equipment owner. In the event you change your mind and/or do not sign our terms and conditions, you will be charged a four hundred and ninety five dollar fee or fifty percent of the value of the credit on file whichever is more for access you have had to our national listing service and you will be given ninety days of access from your deposits original submission date, the national listing service fee may be deducted from your deposit credit or paid separately (at our discretion). (You can request references via a link at the bottom).No national listing service fee will be charged to you as long as you keep your full deposit on file or buy any piece of equipment that you list as wanting to buy on our terms and conditions agreement with us (Even if it's found from another vendor or independent seller not yet listed on this site as long as you have signed our terms and conditions agreement and that equipment was listed on it).
Please note the national listing service fee is deemed earned immediately, this fee is only voided if you sign our terms and conditions agreement and successfully purchase a piece of equipment you have listed on that agreement within 1 year. You can also get the terms and
conditions free of charge by being a member of our VIP Service here http://www.buytanningsalons.com/ways-to-shop.html
In the event any of your offer/offers are not accepted please email us at sales@BuyTanningSalons.com to request instructions to get any remaining credit balance to you, a few questions will be required to answer for verification reasons. All credit balances will expire 1 year unless they are used or requested back .
You can request references here http://www.buytanningsalons.com/requestrefrences.html