- CNC Machinery
- >
- 2008 FOM Argo 40 RM 3-Axis CNC Router for Aluminum Extrusion 596 Hrs
2008 FOM Argo 40 RM 3-Axis CNC Router for Aluminum Extrusion 596 Hrs
SKU:
$69,000.00
$20,700.00
$20,700.00
Unavailable
per item
Minimum deposit credit purchase to make an offer $20700
Reference # TahaFazalCPKJuly11-9-50am
FOM CNC Router for Aluminum Extrusion CNC Store Front Machine!
Model:Argo 40 RM
Year: Not Available
Cosmetic Condition: Excellent
Rating: 3) Used/Tested
Replacement Cost: Not Available
Technical Specifications:
380/460V, 60CY, 3PH
Hours on Meter: 596.5
Axes travel
X axis -- longitudinal travel mm 4390
Y axis -- transversal travel mm 1100
Z axis -- vertical travel mm 425
Electrosplindle rotation 0°/90°/180°
Work capacity
X axis Longitudinal travel mm 4.150
Y axis Transversal travel with electrospindle
90° - 540 mm
0-90° - 460 mm
90°-180° - 540
0°-180° - 460mm
Z axis Vertical travel
90° - 300 mm
90°/180° - 250mm
0°/90° - 250mm
0°/180° - 250 mm
Axes movement
X axis
Rapid traverse: m/1' -- 100mm
Acceleration: m/s 2 - 2,5
Y axis
Rapid traverse: m/1' -- 60mm
Acceleration: m/s 2 - 3 mm
Z axis
Rapid traverse m/1' -- 30mm
Acceleration m/s 2 -- 2mm
Machine precision
Positioning precision ± 0,13
Repeatability precision ± 0,07
Electro-spindle
Cone: ISO 30 DIN 69871
Power 4 Kw
Max. torque 6,5 Nm
Max. rotation speed 12.000 rpm
Tool replacement time 8 sec.
Number of tools possible 6 N°
Maximum tool weight 6 Kg.
Maximum tool length 124 mm
Maximum tool diameter 220 mm
Numeric control
Type:VISION PLUS
Specifications for Install
Total installed power: 10 kW
Air consumption - cone cleaning: 27 Nl/min
Air consumption per cycle: 44,5 Nl
Continuous air consumption - electrospindle cooling 200 Nl / min
Connection voltage 380/460 V
Connection frequency 50/60 Hz
Working pressure 7 atm
Dimensions 18.6 ' (5668mm) X 6.2'(1875mm) X 8.1' (2460mm)
Weight (2460 Kg)
Spindle Head
Constructed with a system of crossed tables in lightweight alloy to obtain a reduction in weight, high resistance to loads and accuracy in the mechanical work they perform, all at the same time. The solution used has considerable advantages in terms of machining precision and maintenance.
Electro-spindle
Designed by Fom Industries, this electro-spindle ensures important performances, both at low number of revolutions as well as at high speed, to satisfy the increasing needs in terms of flexibility. The 4kW electro-spindle is equipped with constant torque, rotation speed up to 12,000 rpm, adjustable, positioning 0° / 90° / 180° for machining the three profile sides, forced air cooling, ISO 30
Tools Lubrication
With pure oil, by means of a sprayer with over-pressure device (minimal lubrication).
Working Area Situated on the base and made up of:
4 pneumatic vices (expandable) for locking the profiles. They slide on flat guide-ways with manual locking. Manual movement/positioning with position indicated on the control unit monitor. Clamping jaws are positioned using a patented pushbutton system. Patented pivoting clamping system ensures optimum adhesion to the profile.
1 retractable sliding pneumatic stop.
Omega 200 Control
PC PENTIUM 4 comprising:
Windows XP Professional SP2.
FomCam.
Vision Interface 4 software for managing blocks of manual control and service on line - assistance interface
Note: The programs are to be installed on a P.C. and with the above characteristics.
FOM CAM
Graphic interface based on the Windows operating system for planning the machining operations and the pieces which automatically generates the CNC program that can be executed by the machining centre.
Program features:
Easy to learn and easy to use, highly flexible 3D simulation of parts, tools and machinings
Display the piece position on the machine
Double cell machines management
Vises and fixtures management
Machining library for accessories
DXF Profile Library
Vise position optimization
Automatic bar-code recognition
Integration with ProF2 (window software)
Please note you are paying for a deposit for a used Equipment listing. After you have signed our terms and conditions that will be emailed you can clarify the exact offer amount you wish to make and we will present the offer (provided it complies with our terms and conditions and you have signed our terms and
conditions) for you to the seller. Please Note until the buyers terms and conditions are signed your offer will not be presented to the seller/equipment owner. In the event you change your mind and/or do not sign our terms and conditions, you will be charged a four hundred and ninety five dollar fee or fifty percent of the value of the credit on file whichever is more for access you have had to our national listing service and you will be given ninety days of access from your deposits original submission date, the national listing service fee may be deducted from your deposit credit or paid separately (at our discretion). (You can request references via a link at the bottom).No national listing service fee will be charged to you as long as you keep your full deposit on file or buy any piece of equipment that you list as wanting to buy on our terms and conditions agreement with us (Even if it's found from another vendor or independent seller not yet listed on this site as long as you have signed our terms and conditions agreement and that equipment was listed on it).
Please note the national listing service fee is deemed earned immediately, this fee is only voided if you sign our terms and conditions agreement and successfully purchase a piece of equipment you have listed on that agreement within 1 year. You can also get the terms and
conditions free of charge by being a member of our VIP Service here http://www.buytanningsalons.com/ways-to-shop.html
In the event any of your offer/offers are not accepted please email us at sales@BuyTanningSalons.com to request instructions to get any remaining credit balance to you, a few questions will be required to answer for verification reasons. All credit balances will expire 1 year unless they are used or requested back .
You can request references here http://www.buytanningsalons.com/requestrefrences.html
Reference # TahaFazalCPKJuly11-9-50am
FOM CNC Router for Aluminum Extrusion CNC Store Front Machine!
Model:Argo 40 RM
Year: Not Available
Cosmetic Condition: Excellent
Rating: 3) Used/Tested
Replacement Cost: Not Available
Technical Specifications:
380/460V, 60CY, 3PH
Hours on Meter: 596.5
Axes travel
X axis -- longitudinal travel mm 4390
Y axis -- transversal travel mm 1100
Z axis -- vertical travel mm 425
Electrosplindle rotation 0°/90°/180°
Work capacity
X axis Longitudinal travel mm 4.150
Y axis Transversal travel with electrospindle
90° - 540 mm
0-90° - 460 mm
90°-180° - 540
0°-180° - 460mm
Z axis Vertical travel
90° - 300 mm
90°/180° - 250mm
0°/90° - 250mm
0°/180° - 250 mm
Axes movement
X axis
Rapid traverse: m/1' -- 100mm
Acceleration: m/s 2 - 2,5
Y axis
Rapid traverse: m/1' -- 60mm
Acceleration: m/s 2 - 3 mm
Z axis
Rapid traverse m/1' -- 30mm
Acceleration m/s 2 -- 2mm
Machine precision
Positioning precision ± 0,13
Repeatability precision ± 0,07
Electro-spindle
Cone: ISO 30 DIN 69871
Power 4 Kw
Max. torque 6,5 Nm
Max. rotation speed 12.000 rpm
Tool replacement time 8 sec.
Number of tools possible 6 N°
Maximum tool weight 6 Kg.
Maximum tool length 124 mm
Maximum tool diameter 220 mm
Numeric control
Type:VISION PLUS
Specifications for Install
Total installed power: 10 kW
Air consumption - cone cleaning: 27 Nl/min
Air consumption per cycle: 44,5 Nl
Continuous air consumption - electrospindle cooling 200 Nl / min
Connection voltage 380/460 V
Connection frequency 50/60 Hz
Working pressure 7 atm
Dimensions 18.6 ' (5668mm) X 6.2'(1875mm) X 8.1' (2460mm)
Weight (2460 Kg)
Spindle Head
Constructed with a system of crossed tables in lightweight alloy to obtain a reduction in weight, high resistance to loads and accuracy in the mechanical work they perform, all at the same time. The solution used has considerable advantages in terms of machining precision and maintenance.
Electro-spindle
Designed by Fom Industries, this electro-spindle ensures important performances, both at low number of revolutions as well as at high speed, to satisfy the increasing needs in terms of flexibility. The 4kW electro-spindle is equipped with constant torque, rotation speed up to 12,000 rpm, adjustable, positioning 0° / 90° / 180° for machining the three profile sides, forced air cooling, ISO 30
Tools Lubrication
With pure oil, by means of a sprayer with over-pressure device (minimal lubrication).
Working Area Situated on the base and made up of:
4 pneumatic vices (expandable) for locking the profiles. They slide on flat guide-ways with manual locking. Manual movement/positioning with position indicated on the control unit monitor. Clamping jaws are positioned using a patented pushbutton system. Patented pivoting clamping system ensures optimum adhesion to the profile.
1 retractable sliding pneumatic stop.
Omega 200 Control
PC PENTIUM 4 comprising:
Windows XP Professional SP2.
FomCam.
Vision Interface 4 software for managing blocks of manual control and service on line - assistance interface
Note: The programs are to be installed on a P.C. and with the above characteristics.
FOM CAM
Graphic interface based on the Windows operating system for planning the machining operations and the pieces which automatically generates the CNC program that can be executed by the machining centre.
Program features:
Easy to learn and easy to use, highly flexible 3D simulation of parts, tools and machinings
Display the piece position on the machine
Double cell machines management
Vises and fixtures management
Machining library for accessories
DXF Profile Library
Vise position optimization
Automatic bar-code recognition
Integration with ProF2 (window software)
Please note you are paying for a deposit for a used Equipment listing. After you have signed our terms and conditions that will be emailed you can clarify the exact offer amount you wish to make and we will present the offer (provided it complies with our terms and conditions and you have signed our terms and
conditions) for you to the seller. Please Note until the buyers terms and conditions are signed your offer will not be presented to the seller/equipment owner. In the event you change your mind and/or do not sign our terms and conditions, you will be charged a four hundred and ninety five dollar fee or fifty percent of the value of the credit on file whichever is more for access you have had to our national listing service and you will be given ninety days of access from your deposits original submission date, the national listing service fee may be deducted from your deposit credit or paid separately (at our discretion). (You can request references via a link at the bottom).No national listing service fee will be charged to you as long as you keep your full deposit on file or buy any piece of equipment that you list as wanting to buy on our terms and conditions agreement with us (Even if it's found from another vendor or independent seller not yet listed on this site as long as you have signed our terms and conditions agreement and that equipment was listed on it).
Please note the national listing service fee is deemed earned immediately, this fee is only voided if you sign our terms and conditions agreement and successfully purchase a piece of equipment you have listed on that agreement within 1 year. You can also get the terms and
conditions free of charge by being a member of our VIP Service here http://www.buytanningsalons.com/ways-to-shop.html
In the event any of your offer/offers are not accepted please email us at sales@BuyTanningSalons.com to request instructions to get any remaining credit balance to you, a few questions will be required to answer for verification reasons. All credit balances will expire 1 year unless they are used or requested back .
You can request references here http://www.buytanningsalons.com/requestrefrences.html