- CNC Machinery
- >
- Shop Sabre CNC Router
Shop Sabre CNC Router
SKU:
$25,000.00
$7,500.00
$7,500.00
Unavailable
per item
Minimum deposit credit purchase to make an offer $7500
Reference # TahaFazalCPKJuly10-8-51pm
***I WILL CONSIDER REASONABLE OFFERS***
ShopSabre 4814 Model Specs:
• Table Bed Cut Area: 60" x 121" with ATC (Auto Tool Changer)
• Gantry Clearance: 10" with ATC 5 positions with tool height switch
• Maximum Travel Speeds on X & Y: 1200IPM with Mitsubishi Servo Motors (Cut Speeds Vary)
• Maximum Travel Speeds on Z: 800IPM with Mitsubishi Servo Motors (Cut Speeds Vary)
• Z Travel: 9"
• Machine Weight: 2800 lbs
• Machine Foot Print (Including Gantry): 79" x 161" x 80"
• Machine Structure: Steel Tube Frame- Welded
• Gantry Structure: Dual Tube Steel with Cold Rolled Plate Steel Uprights
• Drive System: Center Driven Anti-Backlash Harden Steel Ball Screw by THK/HiWinn
• Bearing System: 25MM Linear Guide Rails and Bearings with Quad Roller Sets and Triple Seal by THK/HiWinn
• Controller: ShopSabre WINCNC Advanced Controller
• PC System: Included with 320GB Hard Drive and PCI Controller Board Installed
• Networkable: Yes
• PC to PC Connectivity for Diagnosis and Training: Yes
• Software: Vectric V-Carven Pro
5 hp HSD spindle
20 hp FPZ vacuum pump
Currently running!
Selling to buy larger machine. I am buying another Shop Sabre machine. Shop Sabre is great to work with, excellent customer service.
Power Requirements:
Control Box - 220V Single Phase - 15 Amps
Spindle - 200-240V Single Phase (35 Amps) or Three Phase (25 Amps)
Vacuum Pump - 208/230/460V Three Phase (100 Amp Service for Startup, 54 Amps Running)
Air Requirement - 5 CFM at 100 PSI - Dry Air
Please note you are paying for a deposit for a used Equipment listing. After you have signed our terms and conditions that will be emailed you can clarify the exact offer amount you wish to make and we will present the offer (provided it complies with our terms and conditions and you have signed our terms and
conditions) for you to the seller. Please Note until the buyers terms and conditions are signed your offer will not be presented to the seller/equipment owner. In the event you change your mind and/or do not sign our terms and conditions, you will be charged a four hundred and ninety five dollar fee or fifty percent of the value of the credit on file whichever is more for access you have had to our national listing service and you will be given ninety days of access from your deposits original submission date, the national listing service fee may be deducted from your deposit credit or paid separately (at our discretion). (You can request references via a link at the bottom).No national listing service fee will be charged to you as long as you keep your full deposit on file or buy any piece of equipment that you list as wanting to buy on our terms and conditions agreement with us (Even if it's found from another vendor or independent seller not yet listed on this site as long as you have signed our terms and conditions agreement and that equipment was listed on it).
Please note the national listing service fee is deemed earned immediately, this fee is only voided if you sign our terms and conditions agreement and successfully purchase a piece of equipment you have listed on that agreement within 1 year. You can also get the terms and
conditions free of charge by being a member of our VIP Service here http://www.buytanningsalons.com/ways-to-shop.html
In the event any of your offer/offers are not accepted please email us at sales@BuyTanningSalons.com to request instructions to get any remaining credit balance to you, a few questions will be required to answer for verification reasons. All credit balances will expire 1 year unless they are used or requested back .
You can request references here http://www.buytanningsalons.com/requestrefrences.html
Reference # TahaFazalCPKJuly10-8-51pm
***I WILL CONSIDER REASONABLE OFFERS***
ShopSabre 4814 Model Specs:
• Table Bed Cut Area: 60" x 121" with ATC (Auto Tool Changer)
• Gantry Clearance: 10" with ATC 5 positions with tool height switch
• Maximum Travel Speeds on X & Y: 1200IPM with Mitsubishi Servo Motors (Cut Speeds Vary)
• Maximum Travel Speeds on Z: 800IPM with Mitsubishi Servo Motors (Cut Speeds Vary)
• Z Travel: 9"
• Machine Weight: 2800 lbs
• Machine Foot Print (Including Gantry): 79" x 161" x 80"
• Machine Structure: Steel Tube Frame- Welded
• Gantry Structure: Dual Tube Steel with Cold Rolled Plate Steel Uprights
• Drive System: Center Driven Anti-Backlash Harden Steel Ball Screw by THK/HiWinn
• Bearing System: 25MM Linear Guide Rails and Bearings with Quad Roller Sets and Triple Seal by THK/HiWinn
• Controller: ShopSabre WINCNC Advanced Controller
• PC System: Included with 320GB Hard Drive and PCI Controller Board Installed
• Networkable: Yes
• PC to PC Connectivity for Diagnosis and Training: Yes
• Software: Vectric V-Carven Pro
5 hp HSD spindle
20 hp FPZ vacuum pump
Currently running!
Selling to buy larger machine. I am buying another Shop Sabre machine. Shop Sabre is great to work with, excellent customer service.
Power Requirements:
Control Box - 220V Single Phase - 15 Amps
Spindle - 200-240V Single Phase (35 Amps) or Three Phase (25 Amps)
Vacuum Pump - 208/230/460V Three Phase (100 Amp Service for Startup, 54 Amps Running)
Air Requirement - 5 CFM at 100 PSI - Dry Air
Please note you are paying for a deposit for a used Equipment listing. After you have signed our terms and conditions that will be emailed you can clarify the exact offer amount you wish to make and we will present the offer (provided it complies with our terms and conditions and you have signed our terms and
conditions) for you to the seller. Please Note until the buyers terms and conditions are signed your offer will not be presented to the seller/equipment owner. In the event you change your mind and/or do not sign our terms and conditions, you will be charged a four hundred and ninety five dollar fee or fifty percent of the value of the credit on file whichever is more for access you have had to our national listing service and you will be given ninety days of access from your deposits original submission date, the national listing service fee may be deducted from your deposit credit or paid separately (at our discretion). (You can request references via a link at the bottom).No national listing service fee will be charged to you as long as you keep your full deposit on file or buy any piece of equipment that you list as wanting to buy on our terms and conditions agreement with us (Even if it's found from another vendor or independent seller not yet listed on this site as long as you have signed our terms and conditions agreement and that equipment was listed on it).
Please note the national listing service fee is deemed earned immediately, this fee is only voided if you sign our terms and conditions agreement and successfully purchase a piece of equipment you have listed on that agreement within 1 year. You can also get the terms and
conditions free of charge by being a member of our VIP Service here http://www.buytanningsalons.com/ways-to-shop.html
In the event any of your offer/offers are not accepted please email us at sales@BuyTanningSalons.com to request instructions to get any remaining credit balance to you, a few questions will be required to answer for verification reasons. All credit balances will expire 1 year unless they are used or requested back .
You can request references here http://www.buytanningsalons.com/requestrefrences.html